PoE Budgets and Specs

hEX PoE (RB960PGS) and PowerBox Pro (RB906PGS-PB)

• 5 Gigabit Ethernet ports, 1 Gigabit SFP cage
  • SFP cage is not connected to the switch chip. Wire-speed switching on the SFP port is not supported
• Single core 400 Mhz, 128 MB RAM, 16 MB flash
• Port 1 supports passive (24V) or active (802.3 af/at) PoE input to power the device
• Ports 2-5 support passive or active PoE output, depending on the input voltage
  
  • if 48-57 V input voltage is used, output supports 802.3 af/at mode B (4,5+)(7,8-) compatible devices

• The power consumption of this device under maximum load with attachments is 59 W. Without attachments is 6 W.

• Output power budgets
  • Total output max: 2 A (should probably be stated as 48 W instead)
    • 24 V * 2 A = 48 W
    • 48 V * 1 A = 48 W
  • Per port output maximums
    • Input voltage: 12-30 V
      • Per port output max: 1 A
        • 24 V * 1 A = 24 W
    • Input voltage: 31-57 V
      • Per port output max: 450 ma
        • 48 V * 450 ma = 21.6 W

CRS112-8P-4S-IN

• 8 Gigabit Ethernet ports, 4 Gigabit SFP cages
• Single core 400 Mhz, 128 MB RAM, 16 MB flash
• Dual power inputs on the back. Allows support for simultaneous passive and active PoE
  • 18-28 V
  • 48-57 V
• Ports 1-8 support passive or active PoE output, depending on the input voltage
  
  • if 48-57 V input voltage is used, output supports 802.3 af/at mode B (4,5+)(7,8-) compatible devices
• Output power budgets
  • Total output maximums
    • 24 V * 2.8 A = 67.2 W
    • 48 V * 1.4 A = 67.2 W
  • Per port output maximums
    • Input voltage: 12-30 V
      • Per port output max: 1 A
        • 24 V * 1 A = 24 W
    • Input voltage: 31-57 V
      • Per port output max: 450 ma
        • 48 V * 450 ma = 21.6 W

CSS610-8P-2S+IN

• 8 Gigabit Ethernet ports, 2 10 Gigabit SFP+ cages
• SwitchOS lite only (no RouterOS)
• Power input on the front of the switch:
  • 12-57 V via 5.5 mm power jack
    
• Ports 1-8 support passive or active PoE output, depending on the input voltage
  
  • if 48-57 V input voltage is used, output supports 802.3 af/at mode B (4,5+)(7,8-) compatible devices
• Max power consumption with attachments is 162 W. Without attachments is 12 W.
  
• Output power budgets
  • Total output maximums: 140 W
  • Per port output maximums
    • Input voltage: 12-30 V
      • Per port output max: 1 A
        • 24 V * 1 A = 24 W
    • Input voltage: 31-57 V
      • Per port output max: 625 ma
        • 48 V * 625 ma = 30 W

netPower 16P

• 16 Gigabit Ethernet ports, 2 10 Gigabit SFP+ cages
• RouterOS or SwitchOS
• ARM 32-bit Single core 800 Mhz, 256 MB RAM, 16 MB flash
  • Dual power inputs on the back. Allows support for simultaneous passive and active PoE
    • 18-30 V
    • 48-57 V
      
• Ports 1-16 support passive or active PoE output, depending on the input voltage
  
  • if 48-57 V input voltage is used, output supports 802.3 af/at mode B (4,5+)(7,8-) compatible devices
• Max power consumption with attachments is 325 W. Without attachments is 21 W.
  
• Output power budgets
  • Total output maximums: 140 W
  • Max PoE-out on low (<30 V) voltage: 5.6 A: 2.8 A per 8 port group, max 1.1 A per port 
  • Max PoE-out on high (>30 V) voltage: 2.8 A (134.4 W): 1.4 A per 8 port group (67.2 W), max 0.6 A per port (28.8 W)
  • Per port output maximums
    • Input voltage: 12-30 V
      • Per port output max: 1 A
        • 24 V * 1 A = 24 W
    • Input voltage: 31-57 V
      • Per port output max: 625 ma
        • 48 V * 625 ma = 30 W

CRS328-24P-4S+RM

• 500 W power supply built-in

• The device consumes up to 44 W leaving guaranteed 450 W (3 x 150 W per every 8 Ethernet port group)

• Each port can provide up to 30 W of power with any power output option you choose.

• Power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-).

CRS354-48P-4S+2Q+RM

• 750 W power supply built-in
  

• Each port can provide up to 30 W of power with any power output option you choose.

• Power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-).
• Output per port (53V out) 570 mA (30 W)
• Output per port (26V out) 1000 mA (26 W)
• Total output power 700 W
• Total output 27 A at 26 V (702 W), or 13.2 A at 53 V (699.6 W).

#end