PoE Budgets and Specs hEX PoE (RB960PGS) and PowerBox Pro (RB906PGS-PB) 5 Gigabit Ethernet ports, 1 Gigabit SFP cage SFP cage is not connected to the switch chip. Wire-speed switching on the SFP port is not supported Single core 400 Mhz, 128 MB RAM, 16 MB flash Port 1 supports passive (24V) or active (802.3 af/at) PoE input to power the device Ports 2-5 support passive or active PoE output, depending on the input voltage if 48-57 V input voltage is used, output supports 802.3 af/at mode B (4,5+)(7,8-) compatible devices The power consumption of this device under maximum load with attachments is 59 W. Without attachments is 6 W. Output power budgets Total output max: 2 A (should probably be stated as 48 W instead) 24 V * 2 A = 48 W 48 V * 1 A = 48 W Per port output maximums Input voltage: 12-30 V Per port output max: 1 A 24 V * 1 A = 24 W Input voltage: 31-57 V Per port output max: 450 ma 48 V * 450 ma = 21.6 W CRS112-8P-4S-IN 8 Gigabit Ethernet ports, 4 Gigabit SFP cages Single core 400 Mhz, 128 MB RAM, 16 MB flash Dual power inputs on the back. Allows support for simultaneous passive and active PoE 18-28 V 48-57 V Ports 1-8 support passive or active PoE output, depending on the input voltage if 48-57 V input voltage is used, output supports 802.3 af/at mode B (4,5+)(7,8-) compatible devices Output power budgets Total output maximums 24 V * 2.8 A = 67.2 W 48 V * 1.4 A = 67.2 W Per port output maximums Input voltage: 12-30 V Per port output max: 1 A 24 V * 1 A = 24 W Input voltage: 31-57 V Per port output max: 450 ma 48 V * 450 ma = 21.6 W CSS610-8P-2S+IN 8 Gigabit Ethernet ports, 2 10 Gigabit SFP+ cages SwitchOS lite only (no RouterOS) Power input on the front of the switch: 12-57 V via 5.5 mm power jack Ports 1-8 support passive or active PoE output, depending on the input voltage if 48-57 V input voltage is used, output supports 802.3 af/at mode B (4,5+)(7,8-) compatible devices Max power consumption with attachments is 162 W. Without attachments is 12 W. Output power budgets Total output maximums: 140 W Per port output maximums Input voltage: 12-30 V Per port output max: 1 A 24 V * 1 A = 24 W Input voltage: 31-57 V Per port output max: 625 ma 48 V * 625 ma = 30 W netPower 16P 16 Gigabit Ethernet ports, 2 10 Gigabit SFP+ cages RouterOS or SwitchOS ARM 32-bit Single core 800 Mhz, 256 MB RAM, 16 MB flash Dual power inputs on the back. Allows support for simultaneous passive and active PoE 18-30 V 48-57 V Ports 1-16 support passive or active PoE output, depending on the input voltage if 48-57 V input voltage is used, output supports 802.3 af/at mode B (4,5+)(7,8-) compatible devices Max power consumption with attachments is 325 W. Without attachments is 21 W. Output power budgets Total output maximums: 140 W Max PoE-out on low (<30 V) voltage: 5.6 A: 2.8 A per 8 port group, max 1.1 A per port  Max PoE-out on high (>30 V) voltage: 2.8 A ( 134.4 W) : 1.4 A per 8 port group ( 67.2 W ), max 0.6 A per port ( 28.8 W ) Per port output maximums Input voltage: 12-30 V Per port output max: 1 A 24 V * 1 A = 24 W Input voltage: 31-57 V Per port output max: 625 ma 48 V * 625 ma = 30 W CRS328-24P-4S+RM 500 W power supply built-in The device consumes up to 44 W leaving guaranteed 450 W (3 x 150 W per every 8 Ethernet port group) Each port can provide up to 30 W of power with any power output option you choose. Power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). CRS354-48P-4S+2Q+RM 750 W power supply built-in Each port can provide up to 30 W of power with any power output option you choose. Power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). Output per port (53V out) 570 mA (30 W) Output per port (26V out) 1000 mA (26 W) Total output power 700 W Total output 27 A at 26 V (702 W), or 13.2 A at 53 V (699.6 W).   #end