Skip to main content

Microsoft Network Monitor

I had never heard of this tool until today... I've always used Wireshark. Today I needed to view traffic broken out by application (PID/ProcessName). I went hunting and found the Microsoft Network Monitor. Surprisingly it's very feature rich, easy to use, and did exactly what I needed it to do... and sooo much more. Check it out!

Example Filters

Capturing everything except RDP:

!(tcp.port==3389)

Capture only DNS:

DNS

Filter Source or Destination IPv4 Address:

IPv4.Address == 1.1.1.1

Filter Source IPv4 Address:

IPv4.SourceAddress == 1.1.1.1

Filter IPV4 Source and Destination:

IPv4.Address==1.1.1.1 and IPv4.Address==2.2.2.2

 Filter IPv4 Source or Destination to subnet:

((ipv4.Address & 255.0.0.0) == 10.0.0.0)

Filter IPv4 traffic to private only traffic (source and destination in RFC-1918 private subnets):

(((IPv4.SourceAddress & 255.0.0.0) == 10.0.0.0) || ((IPv4.SourceAddress & 255.240.0.0) == 172.16.0.0) || ((IPv4.SourceAddress & 255.255.0.0) == 192.168.0.0))
&&
(((IPv4.DestinationAddress & 255.0.0.0) == 10.0.0.0) || ((IPv4.DestinationAddress & 255.240.0.0) == 172.16.0.0) || ((IPv4.DestinationAddress & 255.255.0.0) == 192.168.0.0))

Example on other sites:

 

-end

Back to top